Three-quarter front viewU.S. DeliveryDelivery eligibility and terms confirmed at checkout.
Assembly OptionsOptional third-party professional assembly.
Warranty CoverageResidential coverage summary and policy route below.
Product SupportSetup resources, parts guidance, and support access.
FITMAX 8-Path Smith System
Eight Smith Paths. One Integrated System.
The FITMAX 8-Path Smith System combines 0° and 7° pitch positions with 0°, 3°, 6°, and 10° convergence settings. Together, they create eight Smith paths selected on the machine and mechanically locked before training.
All eight Smith paths0° / 7° pitch × 0° / 3° / 6° / 10° convergence
Explore all eight paths
Select a pitch row, then choose a convergence angle.
0° Pitch four settings
7° Pitch four settings
01 / SelectChoose pitch and convergence before training.
02 / LockThe selected Smith path is mechanically locked.
03 / TrainSmith, rack, and cable remain one coordinated system.
Three integrated training modes
Smith, Rack & Cable Training
Move between guided Smith, rack-based, and cable-based training in one coordinated system. Available movements vary by configuration and accessories.
MODE 01 / 03
Guided Smith Training
Select and mechanically lock one of eight Smith paths before training.
- Eight paths from 2 pitch × 4 convergence settings
- Selected path is mechanically locked before use
MODE 02 / 03
Rack-Based Training
Use the 1-in hole and 2-in spacing interface for approved rack-based movements and accessories.
- Free-weight training within the integrated rack structure
- Available movements depend on approved accessories and configuration
MODE 03 / 03
Cable-Based Training
Use the integrated cable system for approved cable exercises without adding a separate machine.
- Cable training is integrated into the same system footprint
- Final ratio, travel, and included handle data pending verification
Height & space planning
Trinity Height & Space Planning
Both height options use the same core structure; only the upright height changes.
Selected height80 in
Overall width, including projectionsPending verification
Overall depth, including projectionsPending verification
Minimum ceiling height & top clearancePending verification
Floor and anchoring requirementPending verification
Review build only: the final consumer page must show the complete outside envelope, active training area, minimum ceiling height, top clearance, structural substrate, and anchoring requirements after engineering approval.
01Measure the outermost point
Include handles, horns, crossmembers, and selected attachments.
02Check two clearances
Confirm assembled height and working clearance above.
03Verify the substrate
Confirm floor structure and anchoring before delivery.
Configuration
What’s Included with Trinity
Review the standard configuration, then select the approved height and compatible accessories in the builder.
Standard Configuration
-
FITMAX 8-Path Smith SystemEight selectable, mechanically locked Smith paths.
-
Rack-Based Training Structure1-in holes with 2-in spacing.
-
Cable-Based Training SystemIntegrated cable training within the same system.
-
80-in or 93-in UprightsSelect the height for the approved room conditions.
Optional Accessories
Rack AttachmentsCompatible rack-based additions selected in the builder.
Cable AttachmentsHandles and cable accessories matched to approved configurations.
Training AccessoriesOptional equipment chosen around training use and space.
Exact contents, compatibility rules, and price updates appear inside the builder after approval.
Engineering & testing
Training Drives the Design.
We start with movements, adjustments, transitions, and long-term use—then use engineering and testing to verify the result.
Commercial-grade testing has been completed. The public test summary, applicable configurations, use conditions, installation requirements, and maintenance requirements must be approved before launch.
01 / USE
Start with training
Movements, adjustment points, and transitions define requirements.
02 / DESIGN
Make features earn their place
Integration is evaluated against capability and space.
03 / VERIFY
Test the result
Approved methods, results, and conditions support public claims.
Technical specifications
Trinity Technical Specifications
Use verified dimensions, system data, compatibility details, and installation requirements to confirm Trinity for your space.
80 / 93 inTwo height configurations
≈ 1,614 lbApproximate assembled weight
8 paths2 pitch × 4 convergence settings
1-in / 2-inHole diameter / hole spacing
Detailed Specifications
Confirmed facts appear directly. Fields under verification stay in place so the final page does not lose a purchase-critical answer.
Dimensions & Space
| Height configurations | 80 in / 93 in |
|---|---|
| Overall width including projections | Pending verification |
| Overall depth including projections | Pending verification |
| Active training area | Pending verification |
FITMAX 8-Path Smith System
| Pitch settings | 0° / 7° |
|---|---|
| Convergence settings | 0° / 3° / 6° / 10° |
| Path selection | Selected on the machine and mechanically locked before training |
Cable System
| System configuration | Integrated cable-based training system |
|---|---|
| Ratio, travel, and resistance data | Pending verification |
| Approved included handles | Pending verification |
Rack & Attachment Compatibility
| Hole diameter | 1 in |
|---|---|
| Hole spacing | 2 in |
| Approved compatibility matrix | Pending verification |
Construction & Rated Capacities
| Approximate assembled weight | 1,614 lb |
|---|---|
| Material, finish, and rated capacities | Pending verification |
| Commercial-grade test summary | Public summary required |
Installation & Delivery Requirements
| Floor and anchoring requirements | Pending verification |
|---|---|
| Ceiling and top clearance | Pending verification |
| Delivery access and package data | Pending verification |
Ownership support
Delivery, Assembly, Warranty & Support
Delivery, optional assembly, residential warranty coverage, and product support remain visible at the decision point and here in more detail.
U.S. Delivery
Eligibility, method, charges, access conditions, and timing require final policy approval.
Professional Assembly
Optional service provided, scheduled, and billed by the approved third party.
Residential Warranty
The PDP will summarize approved residential coverage and link to the full policy.
Product Support
Manuals, setup resources, parts guidance, and customer-support routes.
Residential coverage on this page. Commercial coverage on the policy page.
Final terms, duration, exclusions, installation conditions, maintenance requirements, and claim procedures remain pending approval.
Verified owner feedback
Trinity Reviews
Verified review plugin area
Rating summary, filters, verified purchase status, configuration details, media, and individual reviews will be supplied by the selected plugin.
Review prototype contains no invented customer comments.
Buying questions
FITMAX Trinity All-in-One Trainer FAQs
Product & Fit
What is the FITMAX Trinity™ All-in-One Trainer?
Trinity integrates guided Smith, rack-based, and cable-based training in one coordinated strength system.
How does the FITMAX 8-Path Smith System work?
Two pitch settings and four convergence settings create eight paths selected on the machine and mechanically locked before training.
What comes with the Trinity?
The final standard configuration and optional accessory list will be published after approval.
Which height should I choose?
Choose 80-in or 93-in uprights after confirming ceiling height, clearance, product envelope, and installation conditions.
What space and floor preparation are required?
Final dimensions, active area, structural substrate, and anchoring requirements remain pending engineering approval.
Purchase & Ownership
How are delivery and assembly handled?
Eligible U.S. delivery is confirmed during checkout. Optional assembly is provided separately by an approved third party.
What are the cable ratios, travel, and available resistance?
Final cable ratio, travel, resistance, loading, and included-handle data remain pending product approval.
What residential warranty and support are available?
The approved residential summary will appear here with a link to the complete policy before launch.
Can Trinity be used in a commercial facility?
Trinity has completed commercial-grade testing and may be used in approved settings subject to published installation, maintenance, use, and warranty requirements.
Can customers outside the U.S. purchase Trinity?
Online checkout is limited to eligible U.S. destinations. International customers can save a configuration and submit a procurement inquiry.
Build your system
Build Trinity around your training.
Choose height, finish, approved packages, and compatible accessories. Eligible U.S. destinations proceed to checkout; international configurations proceed to quote request.
$—Starting at